Monday 28 November 2011

Fashion Show? Marvelous Dahhling......

Previously on Wee Z: Holes had been created and filled, tanks had been zebra’d and ‘feckin’ scary’ seats had been acquired and discarded. Uni was back in full swing and Zedward was getting impatient on the lack of progress. Alas that may still be an issue....



So by now there were a fair few parts and ideas amassed in my bedroom and in my head. In between work, Rob and I (that’d be the brother again, aka Girl or Brother Bear depending on moods, both his and my own) managed to get out to the garden and unsheet the beasts. They had by now been luxuriating at the bottom of the garden in their new five star accommodation.

Past:


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Present:

Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlarge
Posted Image 
So the idea was to get the public houses off both bikes to allow them to fit under their duvet a bit easier. Then we’d trial fit some of the trinkets to see if they fitted and how on earth they’d look.
My brother and I hadn’t been getting on brilliantly for the last year or so due to various issues. Our communication had deteriorated to such an extent that although we lived with each other, both in Caithness and Aberdeen, that one of the only subjects that we could talk about properly and easily was motorbikes. Everything else seemed to link to points of tension and trouble. The fact that we could both go out and do something together, and arse around like we used to, was great. However it also highlighted how bad things were at the time and how far things had come. Nae good.


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image






So bits were pulled off. I’m sure the wiring will provide some interest later on... a rodents sleeping quarters comes to mind.


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image
So the bikes were dehorned. There was however a complication regarding the throttle and switch gear being stuck to the Pimpernel’s bar. The bolts clamping the two halves of the switchgear together were well and truly rounded and there was no hope of being able to get them out in the usual fashion. We ended up disconnecting the throttle cable from the still shiny carburettor and leaving it all together.


Posted Image


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlarge
Posted Image 
Now this picture is a bit of a shocker. My brother is renowned within the family household for not being particularly mechanically minded, interested nor sympathetic. Tools are things that others pick up and bikes are there to be ridden and put away again. Very hot and invariably dirty; being totally acceptable adjectives to describe their retiring situations.


He is getting better in his elder years but there are many, many stories of such mechanical disinterest, they are however neither here nor there... Saying that, he did tell me over the phone recently that he’d noticed that he’d snapped three of his spokes in the back of his bmx wheel. That illustrates both sides of his reputation/nature; previously he’d have never noticed them....


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



And to prove that that is not just in fact a well, but unsuitably dressed, “Vale crouch”...


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image




Impressive stuff but perhaps not for you young readers, I shall continue, but with the picture of Beeg Bob’s open mouthed gawp at such proof, resplendent and very firmly ingrained in my mind.




So to trial fit the clipons we had to remove the top yokes. At first it looked as if it would be an enormous pain in the American fanny. However, with spectacular mechanical abilities that young gentleman such as the two pictured and literated in these fine pixels, letters and punctuation are inherently possessed with, we managed to not take the entire front end apart. Skills.

Instead we loosened some bolts and used an old hammer handle as a drift and tapped the top yoke off. Luckily, as if those clever Japanese at Kawasaki Heavy Industries had always planned it, there was enough room between all the upfront fripperies and the top yoke to “get her oot”. Cracking. 
And just to prove I’m not being a sneaky geezer and filling your little heads with pig based pastries...


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Posted Image


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image




Check my fine self.... or rather don’t. I have to admit that I find those pictures quite funny as I look a bit fat! Hand on heart I’m not! Vanity aside the yellow was removed leaving the white that we were after.... come on that’s not that obscure is it? Shirley!


So as with any real project there were then the necessary noises. Sadly Nobert couldn’t wait for the clipons to be fitted and made do with the headlight bracketry which was destined for another pile of rubbish...


Resized to 94% (was 1024 x 768) - Click image to enlarge
Posted Image
Once he finally got off we removed the old headlight brackets, fitted the new ones (another ebay purchase) and slipped on the delectable clipons. We then stood back, admired and I took a few photos just to prove how lovely they were.


Posted Image


Posted Image


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image





The Pimpernel was looking foxy and even Phoenix admitted that he felt his engine mount bolts getting a bit stiffer from the sexually charged site. A feat in itself as they already feel as if concrete, rather than Loc-Tite has been smeared on his spindles...




The task completed, it would have made sense to take things off and pack everything up. Dinner was calling and we had things to do. So instead we sat on the bike and made more noises.... 
Posted Image
Feel the speed!


Posted Image


The race beanie (wind tunnel designed) adds to the visual velocity I think.


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image



And cue cheesy grin and general elation.


Posted Image


Then it was the toeless Italian’s shot.


Posted Image


You can begin to see how small the bike is. Rob is about 6 foot 2 or so and I’m about 5 11”. Things may be cramped. Un-huge FTW.


Resized to 94% (was 1024 x 768) - Click image to enlargePosted Image






So finally when we’d become hoarse with all the noises we packed up and put the dudes back under their cover.


In terms of looks we were both quite pleased with the mock up. If everything goes to plan it will at the very least be very pretty, if perhaps unrideable! In the time that’s past Rob and I have started to mend some bridges. Like Zedward there’s still a huge amount to do, fix and finish but we’re hopefully on the right track. With that conclusion, update complete...



Next time on Wee Z: The conversation of Hughs, Tonys and Basils (sic(s)) is reignited.

7 comments:

  1. Glad to read another update on here Ferg. Glad that you and Rob are getting on a wee bit better too. I'll be up in Caithness over Christmas. So brace yourself.

    ReplyDelete
  2. Ferg,

    I just stumbled across here, and I'm a sucker for an old Japanese machines. I'm sad to admit, I didn't read all the way back to the beginning of your blog, but I assume you're building a couple of cafe machines. I dabbled in that a bit, but then gave up due to lack of space and finances. Some day, I'd love to build the real deal, though. What are your plans? How far are you taking it?

    And as to people, well, Pirsig said that there are two types of people, and your brother seems to fit into the romantic category - the kind of person that sees a motorcycle as a machine, a black box that is not his to look inside. He get on it and rides, and when there is a problem he takes it to the mechanic. I, like yourself, am very much the opposite. Gettin' dirty is where it's at.

    Brady
    Behind Bars - Motorcycles and Life
    www.behindbarsmotorcycle.com

    ReplyDelete
  3. Mike, good to hear. There are more stories to tell so I should drop you an email soon. Haven't heard your C90 stories that you promised ages ago!

    ReplyDelete
  4. Brady, thank you for the comment :) Plans are to slowly cafe race the 'Pimpernel'. Things will be quite small at first and I'd like to get it on the road. In the future, depending on if I can fit on it properly and like it, then I'll begin changing more. I really don't like the look of the cable operated front disc!

    Then we'll see what we have left over with the Phoenix....

    I'm still at uni though and struggling with time and tools down in Aberdeen. When I get home properly things should pick up pace.

    Your Pirsig point brought a smile to my face. I think my brother has the other side in him and it seems to be appearing more and more but it's just taken a while!

    I hope you get a chance to read back at some point. It will be interesting to hear your thoughts on it all!

    ReplyDelete
  5. Ferg,

    I found during my work that you need a lot of time to build a custom machine - which I was totally unable to give. A lot of that was a product of my work space, it's pretty hard to strip a motor apart in your driveway, and rebuild it over the course of a month. I've heard bad things about the rain in your crankcase.

    Also, I'd be a whole less concerned withe the look of that front brake than with how well it works, (but I'm a sucker for stopping distance) I once had a friend with a cable driven front brake and he referred to it as "accident avoidance technology" meaning it only did so much to stop you. The machine never killed him, though.

    Good luck pulling it together. I've got you in my blog list, so hopefully I don't miss your updates.

    Brady
    Behind Bars - Motorcycles and Life
    www.behindbarsmotorcycle.com

    ReplyDelete
  6. Mahooooosive delay for a reply.... what have you heard about "rain in crankcase" issues Brady? Would be great to get any information on the bikes, good or bad news!

    I think my meaning was slightly lost in my wording on the front brake. My worries are the same as your's and in its function and not aesthetics. I can't see it being particularly powerful. I have a CG125 with drums front and back that is a bit reluctant to stop quickly and I cant imagine this being much of an improvement!

    At the moment I'm having the same issues you faced, in having a lack of time and proper 'workshop' facilities. The bikes should be going home soon though, so over summer things will hopefully get really moving!

    ReplyDelete
    Replies
    1. Hey Ferg,

      Any water in the crankcase can be a serious issue, depends on how much, what you've done and how long it's been in there. Firing it up with enough water in the case will up the pressure and can blow things out. That being said, I've wound up with fluid (a small amount) in my case without the machine exploding. Why don't you email me at: bradycsteffl at gmail dot com and I'd be happy to trade knowledge with you.

      Brady
      Behind Bars - Motorcycles and Life

      Delete